A B-spline based higher order panel method for analysis of steady flow around marine propellers     

G.-D. Kim  C.-S. Lee  J.E. Kerwin 《Ocean Engineering》2007,34(14-15):2045-2060

A higher order panel method based on B-spline representation for both the geometry and the solution is developed for the analysis of steady flow around marine propellers. The self-influence functions due to the normal dipole and the source are desingularized through the quadratic transformation, and then shown to be evaluated using conventional numerical quadrature. By selecting a proper order for numerical quadrature, the accuracy of the present method can be increased to the machine limit. The far- and near-field influences are shown to be evaluated based on the same far-field approximation, but the near-field solution requires subdividing the panels into smaller subpanels continuously, which can be effectively implemented due to the B-spline representation of the geometry. A null pressure jump Kutta condition at the trailing edge is found to be effective in stabilizing the solution process and in predicting the correct solution. Numerical experiments indicate that the present method is robust and predicts the pressure distribution on the blade surface, including very close to the tip and trailing edge regions, with far fewer panels than existing low-order panel methods.  相似文献   

Fully nonlinear numerical wave tank (NWT) simulations and wave run-up prediction around 3-D structures     

J. -C. Park  M. -H. Kim  H. Miyata  H. -H. Chun 《Ocean Engineering》2003,30(15):1969-1996

A finite-difference scheme and a modified marker-and-cell (MAC) algorithm have been developed to investigate the interactions of fully nonlinear waves with two- or three-dimensional structures of arbitrary shape. The Navier–Stokes (NS) and continuity equations are solved in the computational domain and the boundary values are updated at each time step by the finite-difference time-marching scheme in the framework of a rectangular coordinate system. The fully nonlinear kinematic free-surface condition is implemented by the marker-density function (MDF) technique developed for two fluid layers.To demonstrate the capability and accuracy of the present method, the numerical simulation of backstep flows with free-surface, and the numerical tests of the MDF technique with limit functions are conducted. The 3D program was then applied to nonlinear wave interactions with conical gravity platforms of circular and octagonal cross-sections. The numerical prediction of maximum wave run-up on arctic structures is compared with the prediction of the Shore Protection Manual (SPM) method and those of linear and second-order diffraction analyses based on potential theory and boundary element method (BEM). Through this comparison, the effects of non-linearity and viscosity on wave loading and run-up are discussed.  相似文献   

3D gravity modelling for Anyongbok Seamount in the East Sea     

Moo Hee Kang  Hyun-Chul Han  Hyesu Yun  Gee Soo Kong  Kyong O. Kim  Youn Soo Lee 《Marine Geophysical Researches》2007,28(3):257-269

A seamount chain with an approximately WNW trend is observed in the northeastern Ulleung Basin. It has been argued that these seamounts, including two islands called Ulleung and Dok islands, were formed by a hotspot process or by ridge related volcanism. Many geological and geophysical studies have been done for all the seamounts and islands in the chain except Anyongbok Seamount, which is close to the proposed spreading ridge. We first report morphological characteristics, sediment distribution patterns, and the crustal thickness of Anyongbok Seamount using multibeam bathymetry data, seismic reflection profiles, and 3D gravity modeling. The morphology of Anyongbok Seamount shows a cone shaped feature and is characterized by the development of many flank cones and flank rift zones. The estimated surface volume is about 60 km³, and implies that the seamount is smaller than the other seamounts in the chain. No sediments have been observed on the seamount except the lower slope, which is covered by more than 1,000 m of strata. The crustal structure obtained from a 3D gravity modeling (GFR = 3.11, SD 3.82 = mGal) suggests that the seamount was formed around the boundary of the Ulleung Plateau and the Ulleung Basin, and the estimated crustal thickness is about 20 km, which is a little thicker than other nearby seamounts distributed along the northeastern boundary of the Ulleung Basin. This significant crustal thickness also implies that Anyongbok Seamount might not be related to ridge volcanism.  相似文献   

Three‐dimensional simulation of tsunami run‐up around conical island     

Byung Ho Choi  Dong Chule Kim  Efim Pelinovsky  Seung Buhm Woo 《Coastal Engineering》2007

At the circular Babi Island in the Flores tsunami (1992) and pear shaped island in the Okushiri event (1993), unexpectedly large tsunami run‐up heights in the lee of conic islands were observed. The flume and basin physical model studies were conducted in the Coastal Hydraulic Laboratory, Engineering Research and Development Center, U.S. Army Corps of Engineers to provide a better understanding of the physical phenomena and verify numerical models used in predicting tsunami wave run‐up on beaches, islands, and vertical walls. Reasonably accurate comparison of run‐up height of solitary waves on a circular island has been obtained between laboratory experimental results and two‐dimensional computation model results. In this study we apply three‐dimensional RANS model to simulate wave run‐up on conical island. In the run‐up computation we obtain that 3D calculations are in very good comparison with laboratory and 2D numerical results. A close examination of the three‐dimensional velocity distribution around conical island to compare with depth‐integrated model is performed. It is shown that the velocity distribution along the vertical coordinate is not uniform: and velocity field is weaker in the bottom layer and higher on the sea surface. The maximum difference (about 40%) appears at the time when solitary wave reached the circular island.  相似文献   

Carbon disulfide in the estuarine, coastal, and oceanic environments     

Ki-Hyun Kim  M. O. Andreae 《Marine Chemistry》1992,40(3-4)

The concentration of carbon disulfide (CS₂) in surface water and relevant hydrographic parameters were determined in coastal waters of the eastern USA (Delaware Bay and Chesapeake Bay, including the Potomac River; 7–11 September 1986). The CS₂ concentration varied extensively along the cruise track, from 4 to 510 pmol S(CS₂) l⁻¹ (n = 103). The average values in estuarine, shelf, and oceanic waters were found to be 118 ± 100 pmol S(CS₂) l⁻¹ (n = 54), 51 ± 34 pmol S(CS₂) l⁻¹ (n = 14), and 28 ± 12 pmol S(CS₂) l⁻¹ (n = 35), respectively. To help interpret the geochemical behavior of CS₂, we analyzed the depth distribution of CS₂ in the North Atlantic Ocean during an earlier cruise (23 April–2 May 1986). In most cases, these depth profiles show a near-surface maximum at about 10–20 m depth and a relatively steep gradient below this maximum. Based on the distribution pattern in the water column and evidence provided by earlier workers, we propose that diffusion of CS₂ from bottom sediments may contribute to CS₂ levels in surface seawater. The atmospheric concentration of CS₂ was also investigated at some locations during the September cruise. Except during periods when there was a significant anthropogenic input, the concentration of CS₂ in air was generally in the range of 4–15 pptv (parts per trillion by volume) with a mean of 10.4 ± 4.0 pptv (n = 10). The calculated sea-to-air emission rates of CS₂ at each of our sampling stations show a decreasing trend across estuarine, shelf, and oceanic areas, in agreement with the trend in surface water concentrations.  相似文献   

Experimental Investigation into the performance of the Axial-Flow-Type Waterjet according to the Variation of Impeller Tip Clearance   总被引：1，自引：0，他引：1  

Moon-Chan Kim  Ho-Hwan Chun 《Ocean Engineering》2007,34(2):275-283

The tip clearance inside the duct from the tip of the impeller is very important to the performance of waterjet systems, which fact has been proven in the pump field. The tip clearance is especially important on the model scale because it is very difficult in manufacture to keep the tip clearance constant and minimally small along the inside of the duct. In the present study, a flush-type waterjet propulsion unit (duct, impeller, stator, and nozzle) was designed for an amphibious tracked vehicle. Two impellers of different inner diameter were designed and manufactured in order to investigate the gap effect. Resistance and self-propulsion tests with a 1/5-scale model were conducted in PNU towing tank. The flow rate at the nozzle exit, the static pressure at the various sections along the duct and also the nozzle, the revolution of the impeller, and the torque, thrust, and towing forces at various advanced speeds were measured. Based on these measurements, the performance was analyzed according to the ITTC 96 standard analysis method. Based on this analysis method, the full-scale effective and delivered power of the tracked vehicle was estimated according to the variation of tip clearance.  相似文献   

Water mass formation variability in the intermediate layer of the east sea     

Hong Sik Min  Cheol -Ho Kim 《Ocean Science Journal》2006,41(4):255-260

Long-term variability in the intermediate layer of the eastern Japan Basin has been investigated to understand the variability of water mass formation in the East Sea. The simultaneous decrease of temperature at shallower depths and oxygen increasing at deeper depths in the intermediate layer took place in the late 1960’s and the mid-1980’s. Records of winter sea surface temperatures and air temperatures showed that there were cold winters that persisted for several years during those periods. Therefore, it was assumed that a large amount of newly-formed water was supplied to the intermediate layer during those cold winters. Close analysis suggests that the formation of the Upper Portion of Proper Water occurred in the late 1960’s and the Central Water in the mid-1980’s.  相似文献   

Mean flow and variability in the southwestern East Sea     

Kyung-Il Chang  Nelson G. Hogg  Moon-Sik Suk  Sang-Kyung Byun  Young-Gyu Kim  Kuh Kim 《Deep Sea Research Part I: Oceanographic Research Papers》2002,49(12)

The Ulleung Basin is one of three deep basins that are contained within the East/Japan Sea. Current meter moorings have been maintained in this basin beginning in 1996. The data from these moorings are used to investigate the mean circulation pattern, variability of deep flows, and volume transports of major water masses in the Ulleung Basin with supporting hydrographic data and help from a high-resolution numerical model. The bottom water within the Ulleung Basin, which must enter through a constricted passage from the north, is found to circulate cyclonically—a pattern that seems prevalent throughout the East Sea. A strong current of about 6 cms⁻¹ on average flows southward over the continental slope off the Korean coast underlying the northward East Korean Warm Current as part of the mean abyssal cyclonic circulation. Volume transports of the northward East Korean Warm Current, and southward flowing East Sea Intermediate Water and East Sea Proper Water are estimated to be 1.4 Sv (1 Sv=10⁻⁶ m³ s⁻¹), 0.8 Sv, and 3.0–4.0 Sv, respectively. Deep flow variability involves a wide range of time scales with no apparent seasonal variations, whereas the deep currents in the northern East Sea are known to be strongly seasonal.  相似文献   

Circulation and currents in the southwestern East/Japan Sea: Overview and review     

K.-I. Chang  W.J. Teague  S.J. Lyu  H.T. Perkins  D.-K. Lee  D.R. Watts  Y.-B. Kim  D.A. Mitchell  C.M. Lee  K. Kim 《Progress in Oceanography》2004,61(2-4):105

A review is made of circulation and currents in the southwestern East/Japan Sea (the Ulleung Basin), and the Korea/Tsushima Strait which is a unique conduit for surface inflow into the Ulleung Basin. The review particularly concentrates on describing some preliminary results from recent extensive measurements made after 1996. Mean flow patterns are different in the upstream and downstream regions of the Korea/Tsushima Strait. A high velocity core occurs in the mid-section in the upstream region, and splits into two cores hugging the coasts of Korea and Japan, the downstream region, after passing around Tsushima Island located in the middle of the strait. Four-year mean transport into the East/Japan Sea through the Korea/Tsushima Strait based on submarine cable data calibrated by direct observations is 2.4 Sv (1 Sv = 10⁶ m³ s⁻¹). A wide range of variability occurs for the subtidal transport variation from subinertial (2–10 days) to interannual scales. While the subinertial variability is shown to arise from the atmospheric pressure disturbances, the longer period variation has been poorly understood.Mean upper circulation of the Ulleung Basin is characterized by the northward flowing East Korean Warm Current along the east coast of Korea and its meander eastward after the separation from the coast, the Offshore Branch along the coast of Japan, and the anticyclonic Ulleung Warm Eddy that forms from a meander of the East Korean Warm Current. Continuous acoustic travel-time measurements between June 1999 and June 2001 suggest five quasi-stable upper circulation patterns that persist for about 3–5 months with transitions between successive patterns occurring in a few months or days. Disappearance of the East Korean Warm Current is triggered by merging the Dok Cold Eddy, originating from the pinching-off of the meander trough, with the coastal cold water carried Southward by the North Korean Cold Current. The Ulleung Warm Eddy persisted for about 20 months in the middle of the Ulleung Basin with changes in its position and spatial scale associated with strengthening and weakening of the transport through the Korea/Tsushima Strait. The variability of upper circulation is partly related to the transport variation through the Korea/Tsushima Strait. Movements of the coastal cold water and the instability of the polar front also appear to be important factors affecting the variability.Deep circulation in the Ulleung Basin is primarily cyclonic and commonly consists of one or more cyclonic cells, and an anticyclonic cell centered near Ulleung Island. The cyclonic circulation is conjectured to be driven by a net inflow through the Ulleung Interplain Gap, which serves as a conduit for the exchange of deep waters between the Japan Basin in the northern East Sea and the Ulleung Basin. Deep currents are characterized by a short correlation scale and the predominance of mesoscale variability with periods of 20–40 days. Seasonality of deep currents is indistinct, and the coupling of upper and deep circulation has not been clarified yet.  相似文献   

An initial demonstration of underwater acoustic communication using time reversal   总被引：3，自引：0，他引：3  

Edelmann  G.F. Akal  T. Hodgkiss  W.S. Seongil Kim Kuperman  W.A. Hee Chun Song 《Oceanic Engineering, IEEE Journal of》2002,27(3):602-609

In July 1999, an at-sea experiment to measure the focus of a 3.5-kHz centered time-reversal mirror (TRM) was conducted in three different environments: an absorptive bottom, a reflective bottom, and a sloping bottom. The experiment included a preliminary exploration of using a TRM to generate binary-phase shift keying communication sequences in each of these environments. Broadside communication transmissions were also made, and single-source communications were simulated using the measured-channel response. A comparison of the results is made and time reversal is shown to be an effective approach for mitigating inter-symbol interference caused by channel multipath.  相似文献